Replaceable insert type safety chucks with 90° entry angle have the same capacity as the Mill C type but when the pocket does wear out only the insert needs to be replaced.
Shafted Only half of a set. Has a drive shaft for mounting a brake or clutch. Does not include the unshafted side.
Safety Chuck with shaft, foot mounted, 90-VT1 Series, 80mm square with 90 degree replaceable insert, 7,200lb-ft max torque
Bearings to be rubber / plastic sealed for use in dusty environment
| Capacities | |
| Max Roll Weight Each | 26,455# [12,000kg] |
| Maximum Torque Shafted Side | 7,375.6 ft·lbs (88,507.4 in·lbs) [1,019.7kg-m] [10,000N-m] |
| Dimensions | |
| Drawing | Contact us |
| 3D Model | Contact us |
| Features | |
Entry Angle |
90° |
| Replaceable Insert | Yes |
| Sliding Adjustment | No |
| Installation | |
| Mounting | Foot |
Mounting Bolt Size |
see drawing |
| Mounting Bolt Distance |
see drawing |
| Winding Shaft Length Requirement |  |
| Alignment |  |
| Support | |
| Phone and email Support | |
| Warranty | |
| Replacement Parts | |
| Compare To | |
| JRC Web | NA |
| Boschert | STW 80-120-VT-1 |
| Condition | |
| Product Condition | |
Safety Chuck (B-9797)
- Brand: JRC Web Accessories Categories: - Shafted Side
- Part #: 503272
- Availability: Ships in 26 - 28 weeks from our factory in Fairfield, NJ USA
-
$9,328.00 Each